OHIO SEALANTS INC -- GS-120, RUBBER GUTTER & SEAM SEALANT -- 8030-00N032024
=====================  Product Identification  =====================

Product ID:GS-120, RUBBER GUTTER & SEAM SEALANT
MSDS Date:11/12/1985
FSC:8030
NIIN:00N032024
MSDS Number: BPKDL
=== Responsible Party ===
Company Name:OHIO SEALANTS INC
Address:7405 PRODUCTION DRIVE
City:MENTOR
State:OH
ZIP:44060
Country:US
Info Phone Num:216-255-8900
Emergency Phone Num:216-255-2055
Preparer's Name:ASHCK SHAH
CAGE:OHIOS
=== Contractor Identification ===
Company Name:OHIO SEALANTS INC
Address:7405 PRODUCTION DRIVE
City:MENTOR
State:OH
ZIP:44060
Country:US
Phone:216-255-8900;800-321-3578
CAGE:OHIOS

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENTS (MIXTURE); (SOLVENT MIXTURE WITH MINERAL SPIRITS)
Fraction by Wt: 30%
ACGIH TLV:100 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HIGH VAPOR CONCENTRATIONS (MORE THAN
    1000 PPM) ARE IRRITATING TO THE EYES AND RESPIRAOTRY TRACT, MAY
    CAUSE HEADACHE AND DIZZINESS, ARE ANESTHETIC AND MAY HAVE OTHER
    CENTRAL NERVOUS SYSTEM EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR, START RESUSCITATION. INGEST: DO
    NOT INDUCE VOMIT. CALL MD. EYE: FLUSH WITH WATER FOR AT LEAST 15
    MINUTES. CALL MD. SKIN: WASH WITH SOAP AND WATER. APPLY A MILD SKIN
    CREAM.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:30.0F,-1.1C
Lower Limits:1%
Upper Limits:6.5%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . FLUSH SPILLS FROM EXPOSURE.
Unusual Fire/Explosion Hazard:WATER MAY BE UNSUITABLE EXCEPT AS A
    COOLING AND DILUTION MEDIUM. USE FOG NOZZLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHUT OFF AND ELIMINATE ALL IGNITION SOURCES.
    VENTILATE CONFINED AREAS. OPEN WINDOWS AND DOORS. CONFINE IN
    RETAINING AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARK AND FLAME.
    KEEP OUT OF THE REACH OF CHILDREN. KEEP CONTAINER CLOSED WHEN NOT
    IN USE.
Other Precautions:COMPLY WITH LOCAL FIRE REGULATIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
    VAPOR CARTRIDGE.
Ventilation:VENTILATE TO KEEP CONCENTRATION BELOW TLV. MECHANICAL
    (GENERAL): CAN BE USED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:130 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.26 (H2O=1)
Evaporation Rate & Reference:2 (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:HIGH VISCOSITY CAULK WITH CHARACTERISTIC MINERAL
    SPIRITS ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:HEAT, SPARK, STATIC ELECTRICITY, OPEN
    FLAME.
Hazardous Decomposition Products:FUMES, SMOKE, CO UNDER FIRE
    CONDITIONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOLLOW LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.